Introduction

You can define internal IP ranges, and aNI will analyze access relationships based on the defined ranges to distinguish internal network traffic from internet traffic.

Constraints and Restrictions

• Only IPv4 addresses or ranges are supported. IPv6 addresses and ranges are not supported.

• To avoid conflicts with public IP addresses, the specified IP addresses must be valid internal IP addresses used within the enterprise.

Precautions

• Before you add an IP range, confirm that it is not already used by other services to prevent IP address conflicts.

• To delete an internal IP range, ensure that no access analysis tasks depend on the range. Otherwise, access analysis results may become inaccurate.

Steps

Step 1.Step 1: Log in to SCP and go to Networking > Network Insight > Settings > Internal IPs.

Step 2.Step 2: Click Add. The Add Internal IP pop-up window appears.

Step 3.Step 3: In the IP Address field, enter IPv4 addresses or ranges, with one entry per line.

Step 4.Step 4: Click OK to complete the addition of the internal IP addresses or ranges.

Field Description and Operation Suggestion