Athena NGFW (Next-Generation Firewall)

Athena NGFW (previously known as Network Secure) provides comprehensive protection for every network perimeter, ensuring the safety of your valuable assets, data, and users from emerging threats.
{{ $t('productDocDetail.guideClickSwitch') }}
{{ $t('productDocDetail.know') }}
{{ $t('productDocDetail.dontRemind') }}
8.0.107
Athena NGFW (Next-Generation Firewall) {{ breadTitle }} User Manual O&M Management Routine Inspection Check the Hardware of the Device
{{sendMatomoQuery("Athena NGFW (Next-Generation Firewall)","Check the Hardware of the Device")}}

Check the Hardware of the Device

{{ $t('productDocDetail.updateTime') }}: 2026-02-05

When a Athena NGFW hardware device is working normally, the POWER indicator light stays on. The ALARM indicator light stays on for a long time (about one to five minutes) only when the equipment is started due to system loading and is off during the normal operation of the device. If the ALARM indicator light stays solid red during use and the device is not working properly, follow the steps below:

  1. Turn off the device immediately, and switch the system to the standby device.
  1. Restart the device after half an hour. If the ALARM indicator light still stays on after the restart, contact Sangfor Technical Support in time to determine whether the device is damaged.
  2. The other indicator light on the device is the HA indicator light, which may be on only in the dual state. Suppose the device is deployed in dual-machine hot standby mode. The HA indicator light of the standby device regularly flashes to indicate the current state.