Virtual storage can be configured to be an iSCSI sever so that part of virtual storage can be preallocated as iSCSI disks which can be accessed by iSCSI initiators.

Navigate to Storage > Virtual Storage > iSCSI Virtual Disks and you will see the following information: Name, Status, Virtual Datastore, LUN ID, Disk Size, Write Speed, Read Speed, Target IP Address, and VMs.

To view connected iSCSI initiators, click on the number under the Connected column.

To edit an iSCSI virtual disk, you may select the disk that you want to edit and then click Edit.

To delete an iSCSI virtual disk, you may select the disk that you want to delete and then click Delete.