{{ $t('productDocDetail.updateTime') }}: 2026-01-08

Precautions:

1. aSEC Cloud Security Center can deploy on SCP6.8.0, and the HCI version must be 6.8.0 and above.

2. The licensing import of the aSEC Cloud Security Center has been completed.
3. You must change the aSEC password once every three months.

Steps

Step 1.Log in to the SCP platform as admin, select User and Access Management > Users > Platform Administrators, and click the Create button to create a platform administrator.

Step 2.Configure the following information to complete the creation of the platform administrator.

Name: asec_admin

Role: aSEC Administrator

Login username: asec_admin

Email: Custom

Mobile: Custom

Password: custom

Step 3.Go to System > Services, and click Enable Public Module of Advanced Services.

Step 4.Go to the Compute > Virtual machines page, click Deploy Now, and select Import Virtual Machine.

Step 5.Import the vma file, and select the resource pool, virtual machine group, running location, storage performance, and network card.

Step 6.After the import is successful, enter the Edit virtual machine interface to configure the network card. Check Enable, connect to the physical edge, click the Specify IP button, select Use IPv4 Address, configure the IP address of the aSEC virtual machine, and use it as the management network of the Cloud Security Center (it must be able to communicate with the SCP management network segment). It is recommended to be on the same network segment as the SCP management network.

Step 7.Log in to the HCI cluster where the Cloud Security Center is located, enable the Correlated Security Service port, and enable the partner service. Otherwise, you will not be able to access the aSEC Cloud Security Center service.

Step 8.Power on the virtual machine, enter the VM console and configure the platform security correlation.

Enter the password of the cloud security center to log in. You need to change the password for the first login. The default password is Sfcsec@123. The password change policy is as follows:

• The length is 8~64 characters.
• Must contain 4 items of uppercase letters, lowercase letters, numbers, and special characters, special characters support ~`@#%&<>"',;_-^$.*+?=!:|{}()[]/.
• It cannot be the same as or contain the username.
• The same character cannot appear consecutively, such as aaa, 11, etc.
• Common characters (including upper and lower case) of sangfor/sinfor/dlanrecover cannot be used.
  
  

If there is no modification within 10 minutes or the modification fails, an "Internal Error" will be displayed. In this case, the session has timed out, and you need to log in again before modifying it.

After successful login, click Platform Authentication and select the SCP platform.

Enter the platform authentication page:

• Cluster IP: IP of the SCP management network.

• Username/Password: asec_admin/password.

Click Authenticate to complete the aSEC deployment.