Hyper Converged Infrastructure (HCI/aSV)

Sangfor HCI and aSV provide a unified infrastructure combining compute, storage, networking, and built-in security to simplify deployment, operations, and services.
{{ $t('productDocDetail.guideClickSwitch') }}
{{ $t('productDocDetail.know') }}
{{ $t('productDocDetail.dontRemind') }}
6.11.1R1
Hyper Converged Infrastructure (HCI/aSV) {{ breadTitle }} User Manual Platform Operation and Maintenance Operation and Maintenance tools/modules Troubleshooting Module Test Connectivity
{{sendMatomoQuery("Hyper Converged Infrastructure (HCI/aSV)","Test Connectivity")}}

Test Connectivity

{{ $t('productDocDetail.updateTime') }}: 2026-01-05

Description

Check the connectivity of virtual machines, troubleshoot the causes of network communication failures, and support ICMP, TCP, and UDP packet detection under IPv4/IPv6 protocols.

Precautions

  1. Connectivity detection does not support mutual access between IPv6 and IPv4.
  2. The virtual machine in the shutdown state or the virtual machine in the interface disabled state cannot be selected.

Prerequisites

  1. The virtual machine has the vmTools installed.
  2. Linux requires perl to be installed.

Steps

  1. Navigate to Network > Topology, and click Test Connectivity to enter the Test Connectivity page.

  1. Select the source VM and enter the destination IP.

  1. Click Start to test the network.
  2. Example of successful network test.

  1. Connectivity test failed example. The platform gives suggestions for failure.