Hyper Converged Infrastructure (HCI/aSV)

Sangfor HCI and aSV provide a unified infrastructure combining compute, storage, networking, and built-in security to simplify deployment, operations, and services.
{{ $t('productDocDetail.guideClickSwitch') }}
{{ $t('productDocDetail.know') }}
{{ $t('productDocDetail.dontRemind') }}
6.11.1R1
Hyper Converged Infrastructure (HCI/aSV) {{ breadTitle }} User Manual Storage Configuration Guide Virtual Storage Configuration Guide Modify the Test Connectivity IP Address
{{sendMatomoQuery("Hyper Converged Infrastructure (HCI/aSV)","Modify the Test Connectivity IP Address")}}

Modify the Test Connectivity IP Address

{{ $t('productDocDetail.updateTime') }}: 2026-01-05

Description

Test Connectivity is a network connectivity tester that performs ping to test the network communication and judges whether the network is disconnected.

Precautions

  1. Only two node environment requires the Test Connectivity feature. Three nodes environment is not required.
  2. Test connectivity IP address must be on the same segment as HCI management IP and pingable.

Prerequisites

None.

Steps

  1. Go to Nodes > Communication Interface and select Storage Network Interface.

  1. Click Test Connectivity.

  1. Fill in the IP address that used for check connectivity. It is suggested to use the gateway address of the management IP.