Hyper Converged Infrastructure (HCI/aSV)

Sangfor HCI and aSV provide a unified infrastructure combining compute, storage, networking, and built-in security to simplify deployment, operations, and services.
{{ $t('productDocDetail.guideClickSwitch') }}
{{ $t('productDocDetail.know') }}
{{ $t('productDocDetail.dontRemind') }}
6.11.1R1
Hyper Converged Infrastructure (HCI/aSV) {{ breadTitle }} User Manual HCI Platform Configuration Guide Port Management
{{sendMatomoQuery("Hyper Converged Infrastructure (HCI/aSV)","Port Management")}}

Port Management

{{ $t('productDocDetail.updateTime') }}: 2026-01-05

Description

Supports manually disabling or enabling HCI interfaces. It supports enabling and disabling the SSH interface and can set the IP whitelist for accessing the SSH interface.

Precautions

  1. Disabling the port on the port management interface only closes the external port of the cluster, and does not affect the functions in the cluster. For example, shutting down the VM migration service only affects cross-cluster migration, not migration within the cluster.
  2. After the remote SSH login to the HCI platform, if the operation exceeds 10 minutes, the session will be automatically disconnected by timeout.
  3. A single IP can only access a single HCI cluster 100 times within 10 minutes.

Prerequisites

  1. Log in to the console, enter the System > Port Management interface, and Enable or Disable the ports.

  1. Enable or Disable the SSH port. After the port is Enabled, IP login can be restricted. Check the Allow SSH access by IP address checkbox and enter the allowed IPs in the input box. The maximum number is 100 and click Save.