Hyper Converged Infrastructure (HCI/aSV)

Sangfor HCI and aSV provide a unified infrastructure combining compute, storage, networking, and built-in security to simplify deployment, operations, and services.
{{ $t('productDocDetail.guideClickSwitch') }}
{{ $t('productDocDetail.know') }}
{{ $t('productDocDetail.dontRemind') }}
6.10.0
Hyper Converged Infrastructure (HCI/aSV) {{ breadTitle }} Sangfor Cloud Migration Platform SCMT 3.0 User Manual Platform Deployment Installation and Deployment USB Flash Drive Burning Installation Steps
{{sendMatomoQuery("Hyper Converged Infrastructure (HCI/aSV)","Steps")}}

Steps

{{ $t('productDocDetail.updateTime') }}: 2025-12-22

Step 1.  First, insert the USB flash drive into the PC, then open the UltraISO software. Select File > Open, and load the SCMP iso file to be burned.


Step 2.  Then click Bootable > Write Disk Image, and click Write where other options leave defaults. When finished, close the burning software and remove the USB flash drive.


Step 3.  The writing destination is a USB drive or CD. Make sure to check the Verify checkbox. Then, select the writing method (usually USB-HDD+)

according to the USB boot type supported by the server.

Step 4.  Insert the USB flash drive into the third-party server, and set the BIOS to boot from the USB flash drive.

Step 5.  Enter the disk for installing the platform. The following figure is an

example, select the first 300G disk as the system disk, enter 1, and press Enter.


Step 6.  The system will automatically perform the installation.