{{ secondMenu.name }}
1. After the deployment is complete, you will see the Welcome to use DR System interface on the server console.
2. Enter the default password 123456 to enter the basic information configuration interface.
3. Enter the platform configuration interface. The following configuration items will be shown. Select the fourth option for IP configuration.
Configuration instructions:
• • Start Service: Start all services of the migration platform.
• • Enable WEB Service Port: Enable WEB Service Port.
• • Enable SSH Service Port: Enable SSH port.
• • Bind network adapters and set IPv4: Configure IPv4 network adapter address.
• • Bind network adapters and set IPv6: Configure IPv6 network adapter address.
• • Clear network configuration, then restart: Clear existing network configuration and restart.
• • Restart: Restart the server.
• • Power off: Turn off the server.
• • Power off (force, not recommend): Force the server to shut down.
• • Logout: log out.
4. Select the Bind network adapters and set IPv4 to enter the IP
configuration interface. Enter the planned IP address, subnet mask, gateway, and DNS.
5. After the configuration is complete, use the browser to access the SCMP through https://ConfigureIP to enter the management interface. The
initial username/password is admin/123456. After successfully logging in for the first time, the password will be required to be changed.
{{ $t('index.defaultHeader.chromeBrowserTip') }}